Alterations for Punch and Die Button Products

These are common alterations for Dayton Progress products.

Code	Category	Description
X0	Locking Devices	Dowel slot 1/8" or 3.0mm dia. (F=.5D) at 0, 90, 180 or 270 degrees
X1	Locking Devices	Dowel slot 1/8" or 3.0mm dia. (F=.5D) at angle other than 0, 90, 180 or 270 degrees
X2	Locking Devices	Standard key flat at 0, 90, 180 or 270 degrees
X20	Locking Devices	Standard key flat at 0, 90, 180 or 270 degrees ("F" dim. differs from X2)
X3	Locking Devices	Double standard key flats at 0, 90, 180 or 270 degrees
X30	Locking Devices	Double standard key flats at 0, 90, 180 or 270 degrees("F" dim. differs from X3)
X4	Locking Devices	Dowel slot 1/8" or 3.0mm dia. at 0, 90, 180 or 270 degrees
X41	Locking Devices	Dowel slot 3/16" or 4.0mm dia. at 0, 90, 180 or 270 degrees
X43	Locking Devices	Dowel slot 1/4" or 6.0mm dia. at 0, 90, 180 or 270 degrees
X5	Locking Devices	Standard key flat at angle other than 0, 90, 180 or 270 degrees
X50	Locking Devices	Standard key flat at angle other than 0, 90, 180 or 270 degrees("F" dim. differs from X5)
X6	Locking Devices	Double standard key flats at angle other than 0, 90, 180 or 270 degrees
X60	Locking Devices	Double standard key flats at angle other than 0, 90, 180 or 270 degrees("F" dim. differs from X6)
X7	Locking Devices	Dowel slot 1/8" or 3.0mm dia. at angle other than 0, 90, 180 or 270 degrees
X71	Locking Devices	Dowel slot 3/16" or 4.0mm dia. at angle other than 0, 90, 180 or 270 degrees
X73	Locking Devices	Dowel slot 1/4" or 6.0mm dia. at angle other than 0, 90, 180 or 270 degrees
X8	Locking Devices	Locking flat on land end at angle 0, 90, 180 or 270 degrees
X80	Locking Devices	Locking flat on land end at 0, 90, 180 or 270 degrees ("F" dim. differs from X8)
X81	Locking Devices	Body flat .060" or 1.5mm deep by .500" or 13mm long at 0, 90, 180 or 270 degrees
X82	Locking Devices	Body flat .060" or 1.5mm deep by .625" or 16mm long at 0, 90, 180 or 270 degrees
X83	Locking Devices	Body flat .060" or 1.5mm deep by .750" or 20mm long at 0, 90, 180 or 270 degrees
X84	Locking Devices	Body flat .060" or 1.5mm deep full length at 0, 90, 180 or 270 degrees
X85	Locking Devices	Body flat .093" or 2.5mm deep by .500" or 13mm long at 0, 90, 180 or 270 degrees
X86	Locking Devices	Body flat .093" or 2.5mm deep by .625" or 16mm long at 0, 90, 180 or 270 degrees
X87	Locking Devices	Body flat .093" or 2.5mm deep by .750" or 20mm long at 0, 90, 180 or 270 degrees
X88	Locking Devices	Body flat .093" or 2.5mm deep full length at 0, 90, 180 or 270 degrees
X89	Locking Devices	Body flat specify depth &length at 0, 90, 180 or 270 degrees
X9	Locking Devices	Locking flat on land end at angle other than 0, 90, 180 or 270 degrees
X90	Locking Devices	Locking flat on land end at angle other than 0, 90, 180 or 270 degrees ("F" dim. differs from X9)
X91	Locking Devices	Body flat .060" or 1.5mm deep by .500" or 13mm long at angle other than 0, 90, 180 or 270 degrees
X92	Locking Devices	Body flat .060" or 1.5mm deep by .625" or 16mm long at angle other than 0, 90, 180 or 270 degrees
X93	Locking Devices	Body flat .060" or 1.5mm deep by .750" or 20mm long at angle other than 0, 90, 180 or 270 degrees
X94	Locking Devices	Body flat .060" or 1.5mm deep full length at angle other than 0, 90, 180 or 270 degrees
X95	Locking Devices	Body flat .093" or 2.5mm deep by .500" or 13mm long at angle other than 0, 90, 180 or 270 degrees
X96	Locking Devices	Body flat .093" or 2.5mm deep by .625" or 16mm long at angle other than 0, 90, 180 or 270 degrees
X97	Locking Devices	Body flat .093" or 2.5mm deep by .750" or 20mm long at angle other than 0, 90, 180 or 270 degrees
X98	Locking Devices	Body flat .093" or 2.5mm deep full length at angle other than 0, 90, 180 or 270 degrees
X99	Locking Devices	Body flat specify depth & length at angle other than 0, 90, 180 or 270 degrees
XS19	Shear Angles	Nail Point Shear
XS20	Shear Angles	Chamfer Shear
XS21	Shear Angles	Conical Shear
XS22	Shear Angles	Double Shear
XS23	Shear Angles	Single Shear
XS24	Shear Angles	Single Shear with a flat
BS	Standard	Ball seat location other than 90 degrees.
SB	Standard	Second ball seat
WS	Standard	Whistle stop
X3B	Standard	Shorter or longer point or land length
XAL	Standard	Alternate lead with a 10 degree angle
XAR	Standard	Back taper in matrix relief or on punch point.
XB	Standard	Shorter or longer point or land length
XBB	Standard	Shorter or longer point or land length
XBL	Standard	Straight through land
XBR	Standard	Longer straight length on punches, Shorter straight length on point larger than shank
XD	Standard	Reduced body diameter
XH	Standard	Reduced head diameter
XJ	Standard	Smaller jektole components
XK	Standard	No side hole, for air injection
XL	Standard	Shortened overall length
XLB	Standard	Shortened overall length, B length maintained
XLD	Standard	Alternate lead length
XLL	Standard	Precision standard or shorter overall length
XP	Standard	Point P dimension larger or smaller than standard
XPS	Standard	Super smooth surface finish to improve punch stripping, reduce galling, and improve wear resistance
XSC	Standard	Slug control
XT	Standard	Shorter or longer head thickness
XTK	Standard	Kommercial head thickness
XTT	Standard	Precision standard or shorter or longer head thickness
XW	Standard	Point W dimension larger or smaller than standard
CRN	Surface Treatment	Chromium Nitride coating
XAN	Surface Treatment	DayTAN™ coating
XANL	DISCONTINUED Surface Treatment	Ultra-hard, high aluminum base layer
XCD	Surface Treatment	Diamond-like carbon coating
XCDP	Surface Treatment	Super-smooth finish combined with a DLC coating for low friction with high wear resistance - excellent for stamping aluminum
XCN	Surface Treatment	TiCN coating
XCR	Surface Treatment	DayKool™ cryogenic heat treatment
XN	Surface Treatment	DayTride® treatment
XNA	Surface Treatment	ZertonPlus™ coating
XNAD	DISCONTINUED Surface Treatment	XNADuplex coating (discontinued on 11/29/2016 because point dimension tolerance cannot be guaranteed from varied coating thickness)
XNAP	Surface Treatment	XNAProgress coating
XND	Surface Treatment	DayKote™ treatment
XNM	Surface Treatment	aka MoST coating
XNP	Surface Treatment	Nitride plus coating
XNT	Surface Treatment	DayTiN® coating
XVP	Surface Treatment	Unique combination of surface treatments to create a product similar to VersaPlus