- Price Not Available
- Price Not Available
-
-
0.000.00
Summary
Change configuration| {{summaryItem.Description}}: | None |
|---|---|
Easily-configured Posi-Bend™ Rotary Bender units are engineered to be less complex and less costly than wipe tooling. Rotary bending provides more consistent metal forming without wasting material on tests and regrinds.
• Lowers tooling costs
• Reduces setup time
• Produces bends over 90°
• Bends UHS steel
• Eliminates cam tooling to produce over bends
• Flexible and interchangeable
• Reduces down time
• Requires lower tonnage than traditional wipe tooling
The self-contained rotary bender gently rolls the material without unwanted distortion, sliding, or marring.
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. |  |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) |  |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. |  |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
| Brand | Lamina |
|---|---|
| Bender Type | Posi-Bend Standard |
| Rocker Diameter | 0.625 in (15.88 mm) |
| Bender Length | 6 in (152.4 mm) |
| Saddle Width (E) | 2.125 in (53.98 mm) |
| Minimum Part Height | 0.25 in (6.35 mm) |
| Saddle Height (A) | 0.875 in (22.23 mm) |
| Front Saddle (B) | 0.750 in (19.05 mm) |
| Maximum Part Thickness | 0.042 in (1 mm) |
| Rocker Dimension (G) | 0.246 in (6.248 mm) |
| Saddle to Key (C) | 1.375 in (34.93 mm) |
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. | |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) | |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. | |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
- Brand:
- Lamina
- Bender Type:
- Posi-Bend Standard
- Rocker Diameter:
- 0.625 in (15.88 mm)
- Bender Length:
- 6 in (152.4 mm)
- Saddle Width (E):
- 2.125 in (53.98 mm)
- Minimum Part Height:
- 0.25 in (6.35 mm)
- Saddle Height (A):
- 0.875 in (22.23 mm)
- Front Saddle (B):
- 0.750 in (19.05 mm)
- Maximum Part Thickness:
- 0.042 in (1 mm)
- Rocker Dimension (G):
- 0.246 in (6.248 mm)
- Saddle to Key (C):
- 1.375 in (34.93 mm)
You might also be interested in the following products
Configure Product
- {{segmentOption.Description}}
-
{{segmentOption.Description}}
- {{segmentOption.Description}}
| {{summaryItem.Description}}: | None |
|---|---|
We’re the industry-leader in the production of manufacturing tools such as special punches, die components, die details, punch blanks and metal-stamping tools.
Get In Touch