Closed End Urethane Strippers assure positive stripping and at the same time dampen punch vibration by gripping around the punch point. Since vibration can lead to premature punch failure, using DAYTON PROGRESS Urethane Strippers will increase overall punch life. The closed end feature holds thin stock flat during the stripping cycle, eliminating the problem of damaging the stock strip.
These 65, 75, 125 and 175mm U and V Blocks are manufactured to metric dimensions and fully meet the NAAMS standard. The U Block is manufactured from hardened steel. The V block is self-lubricating in design and is available in either bronze with oil-impregnated graphite plugs or steel with oil-impregnated graphite plugs.
The NAAMS Series of wearstrip fully meets the North American Automotive Standard. They are manufactured from bronze material with oil-impregnated graphite plugs.
The NAAMS Series of wear plate fully meets the North American Automotive Standard. They are 20mm thick and available in plain steel, steel with graphite plugs and bronze with graphite plugs. The bronze and steel with graphite plugs are self-lubricating products and do not require lubrication during production. All NAAMS wear plates are supplied with mounting holes to accommodate M12 S.H.C.S. For ease of identification, all products are marked with the part number.
These 65, 75, 125 and 175mm U and V Blocks are manufactured to metric dimensions and fully meet the NAAMS standard. The U Block is manufactured from hardened steel. The V block is self-lubricating in design and is available in either bronze with oil-impregnated graphite plugs or steel with oil-impregnated graphite plugs.
The NAAMS Series of wear plate fully meets the North American Automotive Standard. They are 20mm thick and available in plain steel, steel with graphite plugs and bronze with graphite plugs. The bronze and steel with graphite plugs are self-lubricating products and do not require lubrication during production. All NAAMS wear plates are supplied with mounting holes to accommodate M12 S.H.C.S. For ease of identification, all products are marked with the part number.
These wear plates are 20mm thick and available in bronze material with graphite, steel with graphite and plain steel.
Self-lubricating wear plates are manufactured from bronze or steel with graphite plugs. The plugs cover 20-25% of the wear surface.
Wear plates are also available in plain steel.
USA Headquarters
500 Progress Road
Dayton, OH 45449